Machine Overview

The automatic powder and granule filling line integrates multihead weighing, rotary filling, cap pressing, induction sealing, labeling, laser coding, and weight checking into one continuous sequence. Output runs at around 30 bottles per minute. From dosing to final inspection, every stage is automated — no manual transfers between steps, no operator stationed between stations.

A 14-head weigher handles dosing. More heads mean more combination calculations per cycle, which is how the system hits target fill weight accurately across products with irregular particle size or mixed bulk density — protein powders, collagen supplements, superfood blends, electrolyte mixes, seasoning blends, instant soup powders, freeze-dried fruit. These aren't uniform free-flowing powders; they're complex blends where a standard auger or volumetric system loses accuracy as product consistency shifts batch to batch.

The rotary filling structure keeps bottle movement continuous rather than indexed — no stop-start between fill cycles, which is where cycle time gets lost on intermittent systems at equivalent output. Dual-head cap pressing follows filling, applying consistent pressure across both cap sides rather than relying on a single-point press that leaves one edge looser than the other.

A built-in checkweigher inspects every bottle after filling. Underfilled or overweight bottles reject automatically — before they reach induction sealing or labeling, not after they've already been fully processed. Laser coding marks batch numbers and expiration dates directly onto the container. Induction sealing and labeling complete the sequence before the finished bottle exits the line.

Product-contact parts are SUS304 stainless steel throughout. The PLC touchscreen stores multiple recipes — switching between a protein powder SKU and a seasoning blend is a recall, not a full parameter re-entry. Modular components — labeling unit, coding system, bottle unscrambler — can be configured or added based on what the production line actually requires rather than what a standard package assumes.

For food brands scaling premium, high-value products, the line addresses the two requirements that matter most at that stage: fill accuracy that holds across complex blends, and a compliance-ready audit trail from batch coding through weight verification.

Key Features of Powder and Granule Filling Line

Integrated Automatic Production Line
Weighing, filling, cap pressing, sealing, labeling, coding, and weight checking run as one continuous sequence — no manual transfers between stages, no operator stationed between steps. What that removes isn't just labor. It removes the inconsistency that manual handoffs introduce between each stage.

14-Head Multihead Weighing System
Fourteen heads run combination calculations simultaneously — more active heads means more combinations per cycle, which is how the system finds the exact target weight across products where particle size and bulk density vary. A standard auger or volumetric system holds accuracy when the product is uniform. This one holds it when it isn't.

Built for Powder and Granule Blends
Fine powders, coarse granules, mixed blends — seasoning mixes, functional food powders, instant beverage blends. These products don't behave uniformly through a dosing system, and that's specifically where the 14-head weigher earns its configuration over simpler alternatives.

Rotary Filling Structure
Continuous bottle movement rather than indexed stop-start — bottles flow through the fill station without pausing between cycles. At 30 bottles per minute, the difference between continuous and indexed operation shows up in actual throughput, not just rated speed.

Dual-Head Cap Pressing
Two pressing heads apply force simultaneously across the cap rather than at a single contact point. A single-point press leaves one side of the cap seated looser than the other — the dual-head system eliminates that asymmetry. Height adjusts to match different bottle and cap dimensions.

Automatic Checkweigher
Every bottle gets weighed after filling. Underfilled or overweight units reject automatically — before induction sealing or labeling, not after the bottle has already been fully processed. Catching the reject early avoids reprocessing cost and keeps the downstream stations running clean product only.

CO₂ Laser Coding
Batch numbers, production dates, expiration dates, logos — marked directly onto the bottle or label surface. Laser marking is permanent and doesn't require ink or consumables, which removes both the replenishment cost and the smearing risk that inkjet coding carries on certain packaging surfaces.

Flexible Labeling
Single-side, double-side, or wrap-around — label configuration matches the bottle shape and branding layout rather than forcing a format compromise. Different bottle geometries run on the same labeling unit through parameter adjustment rather than hardware changes.

SUS304 Stainless Steel Contact Parts
Food-grade 304 throughout. Smooth contact surfaces resist residue buildup from fine powders and granule blends — which matters specifically during cleaning between SKU changes, where powder residue in surface texture carries over into the next batch if it isn't fully removed.

PLC Touchscreen Control
Recipe storage, multi-language support, parameter adjustment from one interface. Switching between a protein powder SKU and a seasoning blend is a recall, not a recalibration — which is where changeover time actually gets recovered on lines running frequent SKU changes.

Modular Configuration
Filling, capping, labeling, coding — each component configures independently based on what the production line actually requires. A line that doesn't need wrap-around labeling doesn't get it built in. One that needs a bottle unscrambler upstream adds it without redesigning the rest of the system.

Parameter of Powder and Granule Filling Line

Weighing Scale Parameter 

• Language Support: Multiple Languages
• Power Requirement: Single-phase AC220 V/50Hz, 60Hz, 2KW
• Number of Weighing Heads: 14
• Material: 304 Stainless Steel (Mirror or Pattern Plate)
• Weighing Range Options: 10–1500 g/10–2000 g/10–3000 g/100–5000 g
• Theoretical Speed: Up to 120 bags/min (for 1500 g–3000 g Weighing Range) /  Up to 80 bags/min (for 5000 g Weighing Range)
• Accuracy: ±1–5 g (depending on material state)
• Hopper Volume: 1.6 L / 2.5 L / 3 L / 4 L / 5 L
• Touch Screen: 10-inch full-color touch display
• Program Storage: Up to 99 product presets
• Packaging Dimensions (L×W×H): 1530×1130×1310 mm (1.6 L / 2.5 L / 3 L Hopper Volume) 1530×1130×1300 mm (4 L Hopper Volume) 1610×1310×1600 mm (5 L Hopper Volume)
• Net Weight: 135 kg
• Gross Weight: 385 kg

Rotary Powder Filling Machine

• Working Capacity: 20–30 cans per minute
• Power Supply: 220 V 50 Hz 300 W
• Air Pressure: 0.6 MPa
• Machine Size (L×W×H): 2000×900×1450 mm
• Total Weight: 200 kg

Cap Pressing Machine

• Machine model: FZ-VTYG02S
• Machine voltage: 110/220 V 50-60 HZ 2 KW
• Suitable bottle size: ①83*107*170 mm ②78*69*132 mm ③56*67*110 mm (Customizable)
• Suitable Cap Size: ①83*107*27 mm②78*69*24 mm③56*67*19 mm (Customizable)
• Working Speed: 25-30 BPM
• Working Pressure: 0.4-0.6 MPa
• Machine Size: About 2420*1172.5*2169 mm(L*W*H)
• Package Size: About 1910*1150*2200 mm(L*W*H)-Main Machine
   About 1600*980*800 mm(L*W*H)-Vibratory Bowl Sorter 1
   About 1100*900*940 mm(L*W*H)-Vibratory Bowl Sorter 2
• Package Weight: About 520 kg-Main Machine
   About 225 kg-Vibratory Bowl Sorter 1
   About 161 kg-Vibratory Bowl Sorter 2

Cap Sealing Machine

• Machine model: FZ-FK4200V
• Power supply: 220 V 50 HZ 4200 W
• Sealing diameter: 15-60 mm/20-70 mm/35-85 mm/50-120 mm/60-130 mm)
• Sealing speed: 0-260 bottles/min(based on bottle size)
• Suitable bottle height: 10-300 mm(based on 900 mm height conveyor belt)
• Machine size: About 700*690*1450 mm
• Machine weight: About 43 kg
• Package size: About 850*650*1590 mm
• Package weight: About 92 kg

Labeling Machine

• Machine Model: FZ-TB600
• Flat Bottle: Single/Double Side
• Power Supply: AC 220 V 50 Hz/60 Hz 1500 W
• Labeling Capacity: 60-350 bottles /min(depends on bottle size)
• Labeling Material Thickness: 20-120 mm
• Labeling Material Height: 30-350 mm
• Label Size: (L)25-300 mm (H)15- 200 mm
• Roll Inside: φ76 mm
• Roll Outside Diameter(mm): φ350 mm
• Machine Size: 2120*940*1500 mm
• Packing Size: 2850*1300*1900 mm
• Net Weight/Gross Weight: 450 kg/650 kg

Laser Coding Machine

• Machine model: FZ-LM1
• Power Supply: 110/220V 50-60Hz 30W
• Cooling Method: Air cooling
• Laser: CO₂
• Port: SD card, USB 2.0, RS232
• Wave Length: 9.3/10.2/10.6 um
• Working Capacity: PVC tubes: 40 m/min PET bottles: 20000 bottles/h Coated Cartons: 35 m/min
• Marking Range: 70*70/90*90/110*110/140*140 mm
• Applications: PET/Acrylic/Glass/Leather/Plastic/Cloth/Rubber(HDPE is not suitable)
• Language: English, French, Korean, Japanese, Russian, Arabic, etc.
• Machine Weight: About 110 kg
• Machine Size: About 1430*565*930 mm

Checkweigher

• Machine Model: FZ-MD210
• Power Supply: AC 220 V±10% 50 HZ (60 HZ)
• Rated Power: 0.15 KW
• Single Weighing Range: 1500 g
• Weighing Accuracy Range: ±0.2 g-±0.5 g
• Minimum Scale: 0.1 g
• Conveying Speed: 30~-100 m/min
• Maximum Speed: 160 pcs/min
• Weighed Material Size: 300 mm (L)*200 mm (W)
• Weighing Platform Conveyor Belt Size: 400 mm (L)*210 mm (W)
• Product Size: 1522 mm(L)*560 mm (W)*1222 mm(H)
• Rejection Method: Push Rod Type/Lever/Flip Plate/Blowing Type/Belt Sinking
• Control System: high-speed A/D sampling controller
• External Air Source: 0.6-1 Mpa
• Air Pressure Interface: 8 mm
• Body Material: SUS304 

Bottle Sorting Machine

• Machine Model: FZ-SP800S
• Bottle Specifications: Square Bottle/Round Bottle
• Conveying Speed: 0-20 revolutions per Minute(Adjustable)
• Voltage: 220 V 50 Hz (110 V can be customized)
• Power Supply: 200 W
• Turntable Diameter: 800 mm Available
• Dimensions: 550*550*990 mm
• Package Size: 1050*1000*1130 mm
• Net Weight/Gross Weight: 93 kg/120 kg

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

FAQ

1. What products is this powder filling line suitable for?

This automatic powder filling line is designed for a wide range of dry food products, including protein powder, collagen powder, superfood blends, seasoning mixes, instant coffee powder, matcha, dry rub, electrolyte powders, and freeze-dried fruit powders. It can also handle mixtures of powder and granules, making it suitable for modern functional food and specialty food applications.

2. Can the machine handle both powder and granule mixtures?

Yes. The system is equipped with a multihead weigher that can accurately measure powders, granules, and mixed materials. This makes it ideal for products like spice blends, instant soup mixes, or beverage powders with inclusions.

3. What is the production capacity of this filling line?

The production speed can reach around 30 bottles per minute, depending on the product type, bottle size, and filling weight. It is well-suited for small to medium-scale food production.

4. Is this machine suitable for food-grade production?

Yes. All product-contact parts are made of SUS304 stainless steel, ensuring hygiene and compliance with food industry standards. The system is designed for safe handling of food powders and dry ingredients.

5. Can I use this line for different bottle sizes and products?

Yes. The machine is highly flexible and can be adjusted for different bottle sizes, cap types, and filling weights. The PLC control system allows operators to store multiple product recipes, making changeovers quick and efficient.

6. Does the machine include a labeling and coding system?

Yes. The line integrates automatic labeling and a CO₂ laser coding system, allowing you to apply labels and print production dates, batch numbers, or logos directly on the packaging.

7. How does the machine ensure filling accuracy?

The system uses a high-precision multihead weigher combined with a checkweigher. Each bottle is weighed before and after filling, and non-compliant products are automatically rejected to ensure consistent product quality.

8. Is the production line fully automatic?

Yes. This is a fully automatic powder bottling line that integrates bottle sorting, feeding, weighing, filling, capping, sealing, labeling, coding, and inspection into one continuous process, minimizing manual labor.

9. Can this machine be customized for my production needs?

Absolutely. The production line is modular and can be customized based on your product type, container size, production capacity, and factory layout. Optional configurations can be added or adjusted as needed.

10. What industries typically use this type of powder filling line?

This machine is widely used in the food industry, especially for functional foods, dietary supplements, specialty beverages, and seasoning products. It is also suitable for related industries such as nutraceuticals and health products.

This automatic honey spoon filling sealing machine is specially designed for single-portion liquid food packaging. It integrates spoon feeding, high-precision piston filling, automatic film placement and heat sealing into one compact rotary system, ensuring stable and continuous production.

Equipped with a food-grade SUS304 stainless steel heated mixing hopper, the machine effectively maintains product fluidity and prevents crystallization, making it ideal for honey, syrup, jam, chocolate sauce and other viscous food products. The dual piston filling system provides accurate volumetric filling, ensuring consistent portion control and reducing material waste.

With adjustable sealing temperature and time, the machine delivers leak-proof and hygienic sealing performance, meeting food industry production requirements. It is widely used for honey spoon packaging in hotels, catering services, retail food brands and promotional markets.

Honey Spoon Filling Sealing Machine Parameter

• Machine Model: FZ-FSHS20
  
• Voltage: 220V/110V/380V 50-60Hz
  
• Power: 2KW
  
• Production Speed: 1600-1800 pcs/h (Depending on product size)
  
• Filling Range: 5-50 ml
  
• Filling Accuracy: ±0.5%
  
• Filling Pump: Piston Pump
  
• Sealing Temperature: 0-400 ℃
  
• Suitable Product Size: Can be customized
  
• Air Supply: 0.5-0.75 MPa, 0.45 m³/min
  
• Machine Size: 1000*1000*1800 mm/ 39.4*39.4*70.9 inches
  
• Machine Weight: 380 kg

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

This automatic ultrasonic tube filling sealing machine is ideal for packaging food paste such as sauce, honey, jam, and condiments. It features a pneumatic piston pump for accurate filling and ultrasonic sealing for clean, secure seals, combining tube feeding, filling, and sealing in a compact, space-saving design.

Tube Filling Sealing Machine Parameter

• Machine Model: FZ-FS006U
  
• Voltage: 110V/220V 50-60 Hz
  
• Power: 4.5 kW
  
• Working Speed: About 20-30 pcs/min
  
• Filling Pump: Piston Pump
  
• Filling Range: 20 ml-300 ml (Customized)
  
• Filling Accuracy: ±1%
  
• Sealing Method: Ultrasonic Sealing
• Ultrasonic Power: 2.6 kW
  
• Suitable Tubes: Plastic Tubes or Aluminum-Plastic Tubes
  
• Tube Size: Length: 50-250 mm; Diameter: Φ16-50 mm
  
• Air Pressure: 0.5-0.8 Mpa
  
• Machine Size: About 1200*800*1500 mm/ 47.2*31.5*59.1 inch
  
• Machine Weight: About 220 kg

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

Description

Automatic powder filling, sachet forming and heat sealing in one continuous packaging process. Designed for coffee powder, milk powder, seasoning, spices, flour and other dry food powders. This automatic food powder packaging machine combines powder dosing, film forming, filling, heat sealing, sachet cutting and date coding into one integrated system. It is designed for food manufacturers and processors that need a continuous and efficient way to package dry, free-flowing and powdered food products into individual sachets. Depending on the product and sachet size, the machine can achieve approximately 40–100 sachets per minute.

Features

High-Speed Packaging — Up to 40–100 sachets/min for efficient food powder production.
Auger Powder Filling — Suitable for coffee, milk powder, spices, seasonings and other dry food powders.
Automatic Sachet Packaging — Integrates forming, filling, sealing and cutting in one process.
Adjustable Sealing — Heat-sealing temperature can be adjusted for different packaging films.
Touchscreen Control — Easy adjustment of filling, speed, sealing and sachet length.
Date Coding — Supports automatic printing of production dates, expiration dates and batch numbers.

Food Packaging Applications

This machine can be used in different parts of the food industry, including:

• Coffee production
  
• Beverage powder production
  
• Dairy powder processing
  
• Seasoning manufacturing
  
• Spice processing
  
• Flour and baking ingredients
  
• Instant food production
  
• Food ingredient manufacturing
  
• Portion-controlled food packaging
• Food-service sachet packaging

Sachet Packaging Formats

The machine can produce different sachet sealing configurations according to the selected forming and sealing structure.

Three-Side Seal

A three-side seal sachet is sealed on three edges and is commonly used for compact single-dose food packaging.

Four-Side Seal

Four-side seal sachets provide a more structured package and can be used for certain premium or portioned food powder applications.

Back Seal

Back-seal packaging forms a longitudinal seal on the rear of the sachet, providing another common format for powder products.

The actual sachet format depends on the selected machine configuration and packaging film.

Technical Specifications

Machine Detail

This automatic servo flow packing machine is designed for hygienic packaging of food products such as cookies, biscuits, and candies. With servo motor control, it automatically detects bag length, ensuring high packing accuracy without manual adjustment. The horizontal pillow packing structure provides stable sealing and smooth operation for continuous production. Food-grade contact parts and PLC touch screen control help food manufacturers achieve consistent packaging quality and improved efficiency.

*Specifications are for reference only and may vary by your product. Please confirm with us if required

Food-Grade Industrial Jacketed Cooking Mixing Kettle

This 200L industrial jacketed cooking kettle is designed for professional food production, integrating heating, stirring, and uniform mixing in one system. The jacketed structure provides efficient and even heat transfer, preventing burning while ensuring precise temperature control during processing. Equipped with a planetary mixing and wall-scraping system, it is especially suitable for high-viscosity foods such as chili sauce, jam, chocolate paste, candy syrup, caramel, fillings, and thick sauces.

All material contact parts are made of food-grade stainless steel, meeting hygiene standards and allowing easy cleaning after production. The motorized tilting discharge design enables fast and complete emptying, reducing material waste and improving production efficiency. This machine is widely used in sauce factories, confectionery production, central kitchens, and food processing plants for consistent, large-batch cooking and mixing operations.

Jacketed Cooking Kettle Parameter

• Machine Model: FZ-CG200L
• Machine Voltage: 380V
• Mixing Power: 1.5 KW
• Working Capacity: 200 L(Can be customized)
• Heating Power: 12 KW
• Material: 304 Stainless Steel
• Rotating Speed: 40 r/min
• Machine Size: 1000*1000*1000 mm
• Machine Weight: 200 kg

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

Product Description

FZ-BM600L 600L Horizontal Powder Mixing Machine Built for powder and granule blending, in food processing and industrial settings alike. A 600L tank gives it real batch capacity — enough for dry ingredients across a range of volumes.

Tank and internal structure: SUS304 stainless steel throughout. Holds up over time, and cleaning between runs stays straightforward. Inside, mixing ribbons pair with blades. Together they increase material contact, so the blend comes out thorough rather than patchy.

Mixing speed adjusts by material — thicker or finer, the setting shifts accordingly. Discharge is easy too, thanks to the tilting tank design. Less manual handling, faster turnaround between batches.

Food powders, seasoning powders, nutritional powders — this machine covers most dry powder and granule materials, prepping them for whatever comes next, whether that's further processing or straight to packaging.

Features

Large 600L Mixing Capacity
The machine is equipped with a 600L large-capacity mixing tank, providing efficient mixing performance for powder and granule materials. The tank capacity can also be customized according to different production requirements.

SUS304 Stainless Steel Construction
The mixing tank and internal mixing structure are made of SUS304 stainless steel, offering a durable structure and suitable contact surface for food powder and granule mixing applications.

Ribbon & Blade Mixing Structure
The internal mixing system combines ribbons and blades to promote thorough material blending and achieve more uniform mixing results.

Adjustable Mixing Speed
The mixing speed can be adjusted from 0–27 rpm, allowing operators to set suitable parameters according to different material characteristics and mixing requirements.

Tilting Tank for Easy Discharge
The mixing tank can be tilted after processing, helping discharge mixed materials more conveniently and improving production efficiency.

Covered Mixing Chamber
The tank cover helps create a more enclosed mixing area, reducing powder spraying during operation and helping prevent external contamination.

Simple Control Panel
The control panel allows operators to easily adjust operating parameters, including mixing speed and tilting angle, making daily operation more convenient.

Suitable for Powder & Granule Materials
Designed for dry material blending, this horizontal mixer is suitable for mixing various powder and granule ingredients before further processing or packaging.

Applications

This industrial powder mixer is suitable for mixing various food ingredients and dry materials, such as:

• Flour and baking ingredients
  
• Spice powder and seasoning powder
  
• Protein powder and nutritional powder
  
• Coffee powder and beverage powder
  
• Grain and cereal mixtures
  
• Food additives and premixes
  
• Other powder and granule materials

Application suitability depends on the characteristics of the materials being mixed.

Technical Specifications

*Specifications are for reference only and may vary by your product. Please confirm with us if required. 

Machine Detail

Why Choose This Food Powder Mixer?

Product Overview

The FEIZHAN food sachet packaging machine fills and seals single-serve condiments — honey, syrup, ketchup, mustard, salad dressing, BBQ sauce, caramel. Pouch forming, dosing, filling, sealing, and cutting run as one continuous sequence. Date coding is optional. Lane count scales from 2 up to 12, depending on volume requirements.

Filling runs through pneumatic ceramic piston pumps with anti-drip valves. The ceramic surface resists wear from acidic or abrasive condiments better than metal alternatives. The anti-drip valve keeps excess product off the seal area — because a contaminated seal is a weak seal, regardless of how accurate the dose was.

Supply stays stable through a pressurized hopper, with an automatic feeding system available for high-volume runs. Low-viscosity sauces and thick syrups both move through the same system without requiring a mechanical changeover between product types.

All product-contact parts are food-grade 316 stainless steel — the grade that holds up against the cleaning agents and product acidity common in condiment production.

Film tension runs through a servo-driven feeding system. That control determines two things simultaneously: pouch length accuracy and seal quality — both depend on consistent tension as the film moves through the line, not just at the sealing station itself.

Control runs through a Siemens PLC. Recipe storage means a changeover between honey and BBQ sauce doesn't require re-entering parameters from scratch. Diagnostics and alarms flag problems before they become wasted product.

Four-side, three-side, or back-seal — sachet format is configurable. Output reaches up to 100 sachets per minute.

For condiment producers running multiple SKUs or planning volume growth, the lane and format flexibility tends to matter as much as the raw speed number.

Machine Features

Lane Count Scales With Volume

2, 4, 6, 10, or 12 lanes — the configuration depends on required output, not a fixed default. Lanes run simultaneously, which means doubling lane count roughly doubles throughput without doubling floor space. Filling accuracy and seal quality don't degrade as lane count increases; each lane operates as its own independent filling station.

Ceramic Piston Filling, 1–12 ml Range

Pneumatic ceramic pistons handle the dosing. Ceramic wears slower than metal under repeated cycling — which matters most at high lane counts and continuous multi-shift runs, where a metal piston's tolerance would drift over months of operation. Honey, syrup, sauces, condiments — viscosity range is broad, dosing tolerance stays tight.

Anti-Drip Valves

Excess product doesn't reach the seal area. That's the entire function. A drip at the seal point doesn't just waste material — it creates a weak spot exactly where the package needs to be strongest. Removing the drip removes that failure point before it happens.

316 Stainless Steel, Product-Contact Surfaces

316 over 304 for one reason: corrosion resistance against the acids and cleaning agents condiment and food production involves. Surfaces that resist corrosion also clean faster and more completely between runs — a practical benefit, not just a compliance checkbox.

Servo Film Feeding With Photoelectric Tracking

A servo motor pulls film; photoelectric sensors confirm position in real time. The combination keeps pouch length and seal alignment consistent — including at high lane counts and high speeds, where tracking drift would otherwise show up first.

Siemens PLC Control

Recipe storage, self-diagnostics, production monitoring, fault alarms. Switching from one product's parameters to another happens at the panel — no manual recalibration required. Faults get flagged before they turn into a run of rejected sachets.

Applications

The machine is suitable for packaging a wide variety of liquid and semi-liquid food products, including:

• Honey
• Syrup
• Caramel Syrup
• Chocolate Sauce
• Ketchup
• Mustard
• BBQ Sauce
• Salad Dressing
• Jam
• Fruit Sauce
• Condiments
• Liquid Sweeteners
• Flavor Concentrates
• Nutritional Supplements

Machine Parameter

Detailed Machine Features

This semi automatic powder filling machine is specially designed for food powder packaging applications such as protein powder, coffee powder, milk powder, flour, spices and nutritional supplements. Equipped with an auger filling system, mixing tank and weighing function, the machine ensures stable filling accuracy and efficient production performance.

The machine is suitable for both free-flowing and non free-flowing powders. Stainless steel contact parts meet food-grade production requirements and are easy to clean and maintain.

It can be widely used for filling powders into bottles, jars, cans and other containers in the food, nutraceutical and beverage industries.

Key Features

• Auger filling system for high filling accuracy
  
• Suitable for fine powder and slightly sticky powder
  
• Integrated mixing and weighing function
  
• Food-grade stainless steel structure
  
• Easy parameter adjustment through touch screen
  
• Suitable for bottles, jars and cans
  
• Stable operation and low powder dust leakage

Applications

This machine is widely used for packaging various food powders, nutritional supplements, and functional wellness products in bottles, jars, cans, and pouches.

Traditional Food Powder Applications

• Protein powder
  
• Whey protein powder
  
• Coffee powder
  
• Instant coffee mix
  
• Milk powder
  
• Flour
  
• Cocoa powder
  
• Spice powder
  
• Chili powder
  
• Curry powder
  
• Garlic powder
  
• Seasoning powder
  
• Matcha powder
  
• Sugar powder

Functional & Trending Food Applications

• Collagen powder
  
• Mushroom coffee powder
  
• Lion’s mane powder
  
• Reishi mushroom powder
  
• Adaptogen powder blends
  
• Greens powder
  
• Superfood powder
  
• Electrolyte hydration powder
  
• Meal replacement powder
  
• Prebiotic & probiotic powder
  
• Fiber supplement powder
  
• Plant-based protein powder
  
• Clear protein powder
  
• Energy drink powder
  
• Sleep support powder
  
• Nootropic beverage powder

Popular Packaging Industries

• Functional food industry
  
• Sports nutrition industry
  
• Health supplement industry
  
• Beverage powder manufacturing
  
• Wellness product packaging
• Nutraceutical production

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

This semi-automatic powder filling machine is specifically designed for food-grade powder packaging, offering high precision and stable performance for a wide range of edible powders.

It is widely used in industries such as food processing, beverage production, and nutritional supplements, making it ideal for filling products like protein powder, coffee powder, milk powder, cocoa powder, flour, spices, and seasoning blends.

Powered by an auger screw dosing system, the machine ensures accurate and consistent filling, even for fine powders. The adjustable filling range allows it to handle different packaging needs, from small sachets to bottles and jars.

The machine is built with food-grade stainless steel, ensuring hygiene and compliance with food safety standards. Its user-friendly control panel allows operators to easily adjust parameters such as filling volume and speed, improving efficiency without complicated setup.

Whether you are running a small food business, commercial kitchen, or large-scale production line, this powder filling machine provides a reliable solution to improve packaging efficiency and reduce material waste.

Key Features

High-Precision Auger Filling System

Equipped with an advanced auger screw mechanism, this machine ensures accurate and consistent dosing for various food powders such as protein powder, coffee powder, cocoa powder, and spices. Ideal for maintaining product quality and reducing material waste.

Wide Application for Food Powders

Designed for a broad range of food-grade materials, including flour, milk powder, seasoning blends, baking powder, and nutritional supplements. Works well with fine, semi-fine, and slightly sticky powders.

Flexible Packaging Compatibility

Suitable for multiple packaging formats, including bottles, jars, and pre-made pouches. Adjustable filling range allows easy switching between different product sizes and packaging needs.

Food-Grade Stainless Steel Construction

All contact parts are made of food-grade stainless steel, ensuring hygiene, corrosion resistance, and compliance with food safety standards. Easy to clean and maintain for daily production.

User-Friendly Control Panel

Simple interface enables quick adjustment of filling weight, speed, and working parameters, reducing operator training time and improving production efficiency.

Efficient & Stable Performance

Designed for continuous operation with stable filling speed and minimal error, making it suitable for both small businesses and growing food production lines.

Adjustable for Different Powder Types

The machine can be fine-tuned based on powder characteristics, ensuring smooth filling for light powders (like flour) and dense powders (like protein or cocoa) without clogging or inconsistency.

Food Powder Filling Machine Parameter

• Machine Model: FZ-FM100B
• Machine Voltage: 110/220 V 50-60 HZ
• Screw Diameter & Filling Range: φ19 mm, 0.5-10 g/ φ25 mm, 2-15 g/ φ32 mm, 10-30 g/ φ38 mm, 20-50 g/ φ51 mm, 30-100 g/ φ64 mm, 100-500 g/ φ76 mm, 200-2000 g (For reference only, it will be different according to filling material)
• Hopper Size: 35 L(Customized)
• Hopper Diameter: 450 mm(Customized)
• Filling Nozzle Size: Customized
• Working Capacity: 10-25 BPM(Based on filling volume)
• Container Height: H≤300 mm
• Filling Accuracy: ±1 %(based on filling range)
• Machine Size: About 780*750*1150 mm
• Machine Weight: About 120 kg
• Package Size: About 810*810*1300 mm
• Package Weight: About 144 kg

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

This food powder filling machine is designed for accurate and hygienic filling of various food powders, including coffee powder, protein powder, spices, flour and seasoning blends. Equipped with a servo-driven auger system, it ensures precise and consistent dosing even for fine or non-free-flowing powders.

The machine supports a flexible filling range from 5 g to 5000 g by changing augers, making it suitable for different packaging needs such as jars, bottles and bags. The integrated weighing feedback system improves filling accuracy by compensating for density variations, which is especially important for protein powder and mixed seasonings.

To maintain a clean production environment, the machine can be equipped with a vacuum dust collection system and anti-dust filling nozzle, effectively reducing powder scattering during operation. This makes it ideal for food factories that require hygienic and dust-free filling conditions.

With PLC touchscreen control and a user-friendly interface, operators can easily adjust parameters and switch between products. It is a reliable solution for small to medium scale food production, offering both efficiency and precision.

Key Features of Food Powder Filling Machine

Servo Driven Auger for High Accuracy Filling
The servo controlled auger system ensures precise and stable filling performance, making it ideal for fine food powders such as protein powder, coffee powder and seasoning blends.

Flexible Filling Range from 5 g to 5000 g
Interchangeable augers allow easy adjustment for different filling volumes, suitable for small sachets as well as large containers.

Weighing Feedback for Consistent Results
Integrated weighing system automatically corrects filling deviations caused by density variations, ensuring uniform product quality.

Dust Free Filling for Hygienic Production
Equipped with anti-dust filling nozzle and optional vacuum dust collection system, effectively reduces powder scattering and keeps the workspace clean.

Designed for Various Food Powder Applications
Widely used for coffee powder, protein powder, spices, flour, cocoa powder and other dry food ingredients.

User Friendly PLC Touchscreen Control
Simple interface allows operators to adjust parameters quickly, improving efficiency and reducing training time.

Optional Screw Feeder for Continuous Operation
Automatic feeding system supplies powder to the hopper, minimizing manual work and increasing production efficiency.

Parameter of Food Powder Filling Machine

• Machine Model: FZ-FM750F
• Machine Supply: 110V 220 V 380 V 50/60 Hz
• Powder: 2.2 KW
• Production Capacity: Based on Filling Volume
• Filling Range: 5-50 g, 50-300 g, 300-1000 g, 1000-5000 g (By Change Auger)
• Hopper Size of Filling Machine: 50 L
• Hopper Size of Feeding Machine: 150 L
• Feeder Pipe Diameter: 102 mm
• Feeder Ground Height: Customizable
• Number of Filling Heads: 1 Head (Multiple Heads Are Optional)
• Measurement Error: ±1%
• Machine Size: 2950*1150*2000 mm

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

FAQ（Food Powder Filling Machine）

What types of food powders can this machine handle?

This powder filling machine is suitable for a wide range of food powders, including coffee powder, protein powder, spices, flour, cocoa powder and seasoning blends. It performs well with both free-flowing and non-free-flowing powders.

What is the filling range of this machine?

The filling range is from 5 g to 5000 g. By changing augers, the machine can easily adapt to different packaging sizes such as small sachets, jars and bottles.

How accurate is the filling process?

The machine offers high filling accuracy of up to ±1%. With the integrated weighing feedback system, it can automatically adjust for density variations, ensuring consistent results especially for protein powder and mixed seasonings.

Is this machine suitable for food-grade production?

Yes, it is designed for hygienic food production. The anti-dust filling nozzle and optional vacuum dust collection system help maintain a clean working environment and reduce powder contamination.

Can it reduce dust during filling?

Yes. The machine is equipped with an anti-dust filling system, and it can also be fitted with a vacuum dust collector to minimize airborne powder and keep the production area clean.

Is it easy to operate for beginners?

The PLC touchscreen control panel makes operation simple and intuitive. Operators can easily set filling weight, speed and other parameters with minimal training.

Can this machine be used for different packaging types?

Yes, it is suitable for filling powders into bottles, jars, bags and containers, making it versatile for various food packaging needs.

Does the machine support automatic feeding?

An optional screw feeder can be added to automatically supply powder to the hopper, improving efficiency and enabling continuous production.

Is it suitable for small or medium food businesses?

Yes, this semi-automatic powder filling machine is ideal for small to medium scale food production, offering a balance between cost, flexibility and precision.

If you're looking for a clean and efficient way to package sauces, honey, or food pastes into soft tubes, this semi automatic tube filling and sealing machine is a practical solution that balances flexibility and cost.

Designed for small to medium food production, it can handle a wide range of viscous products like ketchup, mayonnaise, chili sauce, chocolate paste, peanut butter, and jam. The filling system ensures stable output with minimal waste, while the sealing unit creates neat, leak-proof tube finishes—so your product doesn’t just taste good, it looks retail-ready too.

The machine is built with a food-grade stainless steel hopper, making it suitable for handling edible materials with better hygiene and easier cleaning. Its adjustable structure allows you to work with different tube sizes, and the customizable molds help ensure accurate positioning and sealing every time.

Operation is straightforward. You can easily control filling volume, working speed, and sealing parameters, making it ideal whether you're testing new products or scaling up production.

In short, this isn’t just a tube filling machine—it’s a compact packaging solution for modern food brands that want flexibility, consistency, and a more premium presentation.

This machine is widely used for packaging:

• Honey
  
• Ketchup & Tomato Sauce
  
• Mayonnaise
  
• Chili Sauce
  
• Peanut Butter
  
• Chocolate Paste
  
• Jam & Fruit Puree
  
• Garlic Paste & Condiments

Key Features

Food grade stainless steel construction
The machine is equipped with a stainless steel hopper and product contact parts, making it suitable for handling food materials such as sauces, honey and pastes. It is easy to clean and helps maintain hygienic production conditions.

Precise filling for viscous products
Designed for thick and semi fluid materials, the filling system ensures stable performance with reduced dripping and material waste. It works well for products like ketchup, mayonnaise, chili sauce and peanut butter.

Customizable tube molds
The tube holding mold can be customized according to different tube diameters and shapes. This helps keep tubes stable during filling and sealing, improving accuracy and overall packaging quality.

Adjustable working height
The machine allows flexible adjustment of the working height, making it compatible with various tube lengths. This is useful for businesses producing multiple product formats.

Reliable sealing performance
The sealing system provides consistent and secure sealing, helping prevent leakage and improving the final appearance of the product. Finished tubes are clean and suitable for retail presentation.

Simple control and operation
The control panel is designed for easy use. Operators can quickly adjust filling volume, sealing temperature and working speed without complicated setup.

Date coding compatibility
The machine can be equipped with a coding system to print production dates or batch numbers, supporting basic traceability requirements for food packaging.

Compact and cost effective solution
This semi automatic machine is suitable for small to medium production needs. It offers a balance between efficiency and investment cost, making it a practical choice for growing food businesses.

Food Sauce Filling Machine Parameter

• Model: FZ-FS002
• Input Power: AC 220 V / 50 Hz
• Power: 2 KW
• Ultrasonic Frequency: 20,000 Hz
• Working Speed: 10-13 pieces/min
• Soft Tube Length: 50-200 mm
• Soft Tube Diameter: 10-50 mm
• Filling Range: 6-60,10-120, 25-250 ml
• Net Weight: 150 kg
• Machine Size: 860*680*1550 mm
• Package Size: About 970*760*1460 mm
• Package Weight: About 206 kg

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

This semi-automatic powder filling machine is designed for accurately filling food powders into bottles, jars, or small bags. Equipped with a high-precision auger dosing system, it ensures stable and consistent filling performance for a wide range of powdered food products.

The machine is widely used for filling spice powder, coffee powder, flour, seasoning powder, protein powder, and other fine food ingredients. The screw feeding system can accurately control the filling amount, reducing material waste while improving production efficiency.

With its compact structure and user-friendly control panel, this powder filler is suitable for small food factories, workshops, and startup food brands. Operators can easily adjust filling weight according to different packaging requirements.

Made with durable materials and a stable frame, the machine provides reliable performance for daily food production. It supports both bottle filling and sachet filling, making it a flexible solution for various food packaging needs.

Auger Powder Filling Machine Parameter

• Machine Model: FZ-FM100P
  
• Machine Voltage: 110/220V 50-60HZ
  
• Machine Power: 750W
  
• Filling Method: Auger Filling
  
• Suggested Filling Volume: 0.1g-1g, 1-5g, 5-10g,10-30g, 30-50g,50-100g (can be chosen according to requirement)
  
• Filling Accuracy: ±2%
  
• Filling Speed: 20-30 bottle/min
  
• Hopperl Size: 5L
  
• Machine Size: About 805*660*1540 mm
  
• Machine Weight: About 82 KG
• Packaging Size: 900*700*1600 mm
• Packaging Weight: 110 KG

*Specifications are for reference only and may vary by your product. Please confirm with us if required

This semi-automatic gummy depositing machine is designed to simplify confectionery production by integrating cooking, mixing, and depositing into one compact system. With a 20L heated cooking tank and a 10L heated hopper, it ensures materials remain at optimal temperature for smooth and consistent filling.

Equipped with 10 precision depositing nozzles, the machine delivers accurate weight control (1–4.5g per piece) and a stable output of up to 24,000 pieces per hour. The built-in touchscreen control panel allows easy parameter adjustment and supports up to 60 recipe memories, making it ideal for manufacturers producing multiple candy types.

Constructed from food-grade 304 stainless steel, this machine is suitable for producing gummies, jelly candies, and chocolate products. Its compact design and reliable performance make it a practical choice for small to medium-scale production and growing confectionery businesses.

Key Features

 All-in-One Cooking & Depositing
Integrates melting, mixing, and depositing into a single system, reducing manual steps and improving overall production efficiency.

High Output up to 24,000 pcs/hour
Designed for stable and continuous production, making it suitable for scaling from small batches to higher-volume manufacturing.

10 Heads Precision Depositing
Equipped with 10 nozzles for accurate filling (1–4.5g per piece), ensuring uniform size, shape, and weight across all products.

Smart Touchscreen Control
User-friendly interface allows easy parameter adjustment and stores up to 60 recipes, enabling fast product changeovers.

Stable Heating System
20L cooking tank with mixer and 10L heated hopper maintain optimal temperature, ensuring smooth flow and consistent depositing.

Food-Grade Stainless Steel Structure
Built with 304 stainless steel, ensuring hygiene, durability, and compliance with food production standards.

Compact & Space-Saving Design
Small footprint with flexible placement, ideal for workshops, startups, or limited production spaces.

Gummy Depositing Machine Parameter

• Machine Model: FZ-CTF50
• Voltage: 380V 50 Hz
• Heating Tubes: 2*3 kW
• Stirring Motor: 0.37/0.55 kW
• Heating Power: 6.5 kW / 380 V
• Depositing Nozzle: 10 Nozzles (Can be customized)
• Depositing Times: 6000-24000 pieces/hour
• Depositing Weight: 1-4.5 g for each time
• Hopper Capacity: 10 L
• Cooking Tank: 20L (With Mixer)
• Heating Temperature: Max 130℃
• Machine Material: 304 Stainless Steel
• Recipes Quantity: 60
• Filling Type: Piston Rod (Non-Pump Type)
• Sample Mold Size: 291.5*291.5*11.3 mm (Customizable, sold separately)
• Sample Cavity Size: 15.5*15.5*10 mm (Customizable)
• Sample Cavity Volume: 2.4 ml (Gummy 3.2 g, Chocolate 2.8 g) (Customizable)
• Machine Size: 650*550*600 mm
• Machine Weight: 65 kg
• Package Size: 750*740*900 mm
• Package Weight: 76 kg

*Specifications are for reference only and may vary by your product. Please confirm with us if required.

Machine Overview

This automatic sachet filling machine is designed for packaging both liquid and paste food products in sachets. Equipped with a servo piston pump and SUS316 magnetic pump, the machine can accurately fill products such as honey, syrup, jam, ketchup, chili sauce, cooking oil, nutritional supplements, and other food products.

The vertical form fill seal (VFFS) system automatically completes bag forming, filling, sealing, coding, and cutting in one process, improving production efficiency while maintaining consistent package quality. Supporting back seal, three-side seal, and four-side seal sachets, this machine provides flexible packaging solutions for food manufacturers seeking reliable and high-speed production.

Machine Features

Dual Filling System for Liquid & Paste Products

Switch easily between a servo piston pump for viscous products and a magnetic pump for free-flowing liquids. One machine can handle multiple food products, reducing equipment investment and production costs.

High-Speed Sachet Packaging

Capable of producing up to 150 sachets per minute, the machine improves packaging efficiency for large-scale food manufacturing operations.

Multiple Sealing Styles Available

Supports back-side sealing, three-side sealing, and four-side sealing sachets, allowing manufacturers to customize packaging appearance according to market requirements.

U-Shaped Mixing Hopper

The integrated agitator continuously mixes viscous products to maintain consistent texture and filling accuracy. Optional heating function is available for products that require temperature control.

Intelligent Touchscreen Control

User-friendly touchscreen interface enables quick parameter adjustment, recipe storage, and real-time monitoring for efficient operation.

Optional Date Coding System

Add production dates, expiration dates, or batch numbers directly onto packaging materials to improve traceability and compliance.

Applications

Suitable for packaging:

Liquid Food Products

• Honey
• Syrup
• Cooking Oil
• Flavoring Liquids
• Nutritional Supplements
• Beverage Concentrates

Paste Food Products

• Ketchup
• Chili Sauce
• Mayonnaise
• Jam
• Peanut Butter
• Chocolate Sauce
• Fruit Paste
• Condiments

Technical Parameters

Machine Details